A center-driven and powerful brush for heavy snow
This powerful sweeper leaves paths, pavements and roads nicely cleared. Once the winter season is over, the sweeper can also be used for other outdoor tasks making it useful all year round
The center-driven brush is controlled hydraulically and easily adjusted to the conditions.
It follows the surface perfectly and sweeps all the way into the kerbs and buildings without damaging them.
That is why you must choose a hydraulic broom
The hydraulic control makes it easy for the driver to check the position of the brush both in front of the tool carrier and on both sides.
Built-in floating position that causes the brushes to follow an uneven surface with a height difference up to 75 mm.
Parallel displacement causes the brush to not turn to the side when turned from right to left causing the brush to have a max width of 1350 mm.
The brush is without gearbox and chain drive and is driven directly hydraulically via 2 hydraulic motors for minimal maintenance.
Rapid changeover by using the tool carrier’s lifting arms and locking lever. The hydraulic hoses are fitted and the support leg dismantled.
The snow sweeper can be combined with the salt and sand spreader for maximum utilisation.
Easy operation with the joystick in the cabin.
- The reversible sweeper makes it possible to sweep the snow backwards so snow can be cleared right up to the front door.
- The Timan 3330 snow sweeper can also be used to sweep leaves during autumn off pavements and paths